Lighting
- Use soft, even light. A large window out of direct sunlight is ideal; overcast days are your friend.
- Avoid the on-camera flash. It creates hard reflections on metal and flattens the stone.
- Bounce light back with a sheet of white card opposite the window, to lift the shadows on the front of the ring.
- If you use lamps, use two of the same colour temperature, diffused through tracing paper or a softbox, either side of the ring.
Angle: front-on


Shoot the ring standing upright, with the stone facing the camera straight on and the band visible either side, as it would look from above on a hand. Keep the lens level with the stone, not looking down on it. This is the view the try-on places on the finger, so it's the one photo that matters most.
Keep your side, profile and detail shots for the rest of the product gallery.
Focus
- Steady the phone on a small tripod or prop it against something solid. Use the timer or a remote so tapping doesn't shake it.
- Tap to focus on the stone, then hold to lock focus and exposure so they don't shift.
- Don't get too close: most phones can't focus within a few centimetres. Step back a little and crop afterwards.
- Zoom in on the finished photo and check the prongs and pavé are crisp. If not, shoot again.
Backgrounds
A plain, light background is easiest to work with and gives the cleanest edges, but it doesn't have to be perfect. VITO removes the background automatically when it prepares each ring, so photos you've already shot on other backgrounds still work.
Phone settings
- Use the main (1×) camera. Digital zoom softens detail.
- Turn off the flash, beauty filters and portrait mode, which can blur the band.
- Shoot at the highest resolution your phone offers.
- Clean the lens. A fingerprint smear is the most common cause of hazy jewellery photos.
- Edit lightly: straighten, crop and correct white balance, and keep colour true to the ring.
Checklist
Ring photo checklist for try-on
Print this and keep it by your photo setup.
- Lens wiped clean
- Soft, even light: a window out of direct sun, or two diffused lamps
- White card to bounce light into the front of the ring
- Ring upright and held steady, facing the camera straight on
- Phone on a tripod or propped, level with the stone
- Main lens, no digital zoom; step back and crop instead
- Focus and exposure locked on the stone
- Flash off, beauty filters off
- Shot sharp at full size: zoom in to check the prongs
- Plain background preferred (VITO removes it either way)
- Colour checked against the real ring before it goes online
